Digital Conductivity Sensor For Water CS3501D

Short Description:

Designed for Pure, Boiler Feed water, Power Plant, Condensate Water.
Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices.
Conductivity sensor technology is an important field of engineering and technology research, used for the liquid conductivity measurement, is widely used in human production and life, as electric power, chemical industry, environmental protection, food, the semiconductor industry research and development, Marine industrial production and essential in the development of technology, a kind of testing and monitoring devices.The conductivity sensor is mainly used to measure and detect industrial production water, human living water, seawater characteristics and battery electrolyte properties.


  • Model No.: CS3501D
  • Power/Outlet: 9~36VDC/RS485 MODBUS RTU
  • Measure material: Graphite
  • Housing material: CPVC
  • Waterproof rating: IP68
  • Measurement range: CON: 0.1-30ms/cm, TDS: 0~15g/L, Salinity: 0~18ppt, 1.8%, 18g/L

Product Detail

Product Tags

Introduction:

Conductivity sensor technology is an important field of engineering and technology research, used for the liquid conductivity measurement, is widely used in human production and life, as electric power, chemical industry, environmental protection, food, the semiconductor industry research and development, Marine industrial production and essential in the development of technology, a kind of testing and monitoring devices.The conductivity sensor is mainly used to measure and detect industrial production water, human living water, seawater characteristics and battery electrolyte properties.

Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water. The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions.

Suitable for low conductivity applications in the semiconductor, power, water and pharmaceutical industries, these sensors are compact and easy to use.The meter can be installed in several ways, one of which is through the compression gland, which is a simple and effective method of direct insertion into the process pipeline.

The sensor is made from a combination of FDA-approved fluid receiving materials. This makes them ideal for monitoring pure water systems for the preparation of injectable solutions and similar applications.In this application, the sanitary crimping method is used for installation.

Technical parameters:

Model No.

CS7832D

Power/Outlet

9~36VDC/RS485 MODBUS RTU

Measurement mode

135°IR scattered light method

Dimensions

Diameter 50mm*Length 223mm

Housing material

PVC+316 Stainless steel

Waterproof rating

IP68

Measurement range

10-4000 NTU

Measurement accuracy

±5% or 0.5NTU,whichever is grater

Pressure resistance

≤0.3Mpa

Measuring temperature

0-45℃

Calibration

Standard liquid calibration, water sample calibration

Cable length

Default 10m,can be extended to 100m

Thread

1 inch

Weight

2.0kg

Application

General applications, rivers, lakes, environmental protection, etc.


  • Previous:
  • Next:

  • Write your message here and send it to us