CS6711 Chloride Ion Sensor
The online chloride ion sensor uses a solid membrane ion selective electrode for testing chloride ions floating in water, which is fast, simple, accurate and economical.
•Chloride ion single electrode and composite electrode are solid membrane ion selective electrodes, used to test free chloride ions in water, which can be fast, simple, accurate and economical.
•The design adopts the principle of single-chip solid ion selective electrode, with high measurement accuracy
•PTEE large-scale seepage interface, not easy to block, anti-pollution Suitable for wastewater treatment in the semiconductor industry, photovoltaics, metallurgy, etc. and pollution source discharge monitoring
•The patented chloride ion probe, with an internal reference fluid at a pressure of at least 100KPa (1Bar), seeps extremely slowly from the microporous salt bridge. Such a reference system is very stable and the electrode life is longer than the ordinary industrial electrode life
•Easy to install: PG13.5 pipe thread for easy submersible installation or installation in pipes and tanks.
•High-quality imported single chip, accurate zero point potential without drift
•Double salt bridge design, longer service life
|
Model No. |
CS6711 |
|
pH range |
2~12 pH |
|
Measuring material |
PVC Film |
|
Housing material |
PP |
|
Waterproof rating |
IP68 |
|
Measurement range |
1.8~35,000mg/L |
|
Accuracy |
±2.5% |
|
Pressure range |
≤0.3Mpa |
|
Temperature compensation |
NTC10K |
|
Temperature range |
0-50℃ |
|
Calibration |
Sample calibration, standard liquid calibration |
|
Connection methods |
4 core cable |
|
Cable length |
Standard 5m cable or extend to 100m |
|
Mounting thread |
NPT3/4” |
|
Application |
Industrial water, environmental protection, etc. |
