Digital Transmitter and Sensors Series
-
Digital Fluoride Ion Online ISE Probe for Wastewater Treatment Sensor CS6710AD
CS6710AD digital fluoride ion sensor uses a solid membrane ion selective electrode for testing fluoride ions floating in water, which is fast, simple, accurate and economical. The design adopts the principle of single-chip solid ion selective electrode, with high measurement accuracy. Double salt bridge design, longer service life.The patented fluoride ion probe, with an internal reference fluid at a pressure of at least 100KPa (1Bar), seeps extremely slowly from the microporous salt bridge. Such a reference system is very stable and the electrode life is longer than the ordinary. -
Digital COD Sensor STP Water Treatment Chemical Oxygen Demand
COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.It does not need reagent, no pollution, more economic and environmental protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability -
Industrial Online Nitrate Nitrogen Sensor NO3-N Chloride Ion Probe Compensation Meter
On-line nitrite nitrogen sensor, no reagents required, green and non-polluting, can be monitored online in real time. Integrated nitrate, chloride (optional), and reference electrodes automatically compensate for chloride (optional), and temperature in water. It can be directly put into installation, which is more economical, environmentally friendly and convenient than traditional ammonia nitrogen analyzer. It adopts RS485 or 4-20mA output and supports Modbus for easy integration. -
Online Digital Nitrate ion Sensor Water Tester Probe SOutput Signal ensor
The electrochemistry sensor uses membrane potential to determine the activity or concentration of ions in solution. When it is in contact with a solution containing the measured ion, a membrane potential directly related to the ion activity is generated at the phase interface of its sensitive film and solution.The parameters that characterize the basic properties of ion-selective electrodes are selectivity,dynamic range of measurements, response speed, accuracy, stability, and lifetime. -
CS5530D Digital Residual Chlorine Sensor
Constant voltage principle electrode is used to measure residual chlorine or hypochlorous acid in water. The constant voltage measurement method is to maintain a stable potential at the electrode measuring end, and different measured components produce different current intensities under this potential. It consists of two platinum electrodes and a reference electrode to form a micro current measurement system. The residual chlorine or hypochlorous acid in the water sample flowing through the measuring electrode will be consumed. Therefore, the water sample must be kept flowing continuously through the measuring electrode during measurement. -
CS6603D Digital COD Sensor Chemical Oxygen Demand COD Sensor
COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.It does not need reagent, no pollution, more economic and environmental protection. On-line uninterrupted water quality monitoring. Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability. -
CS6604D Digital COD Sensor RS485
CS6604D COD probe features highly reliable UVC LED for light absorption measurement. This proven technology provides reliable and accurate analysis of organic pollutants for water quality monitoring at low cost and low maintenance. With rugged design, and integrated turbidity compensation, it is an excellent solution for continuous monitoring of source water, surface water, municipal and industrial wastewaters. -
T6601 COD Online Analyzer
Industrial online COD monitor is an online water quality monitor and control instrument with microprocessor. The instrument is equipped with UV COD sensors. The online COD monitor is a highly intelligent online continuous monitor. It can be equipped with UV sensor to automatically achieve a wide range of ppm or mg/L measurement. It is a special instrument for detecting COD content in liquids in environmental protection sewage related industries. -
Online Chlorophyll Sensor RS485 Output Usable on Multiparameter Sonda CS6400D
The principle of CS6400D Chlorophyll Sensor is using the characteristics of chlorophyll A who has absorption peaks and emission peaks in the spectrum. The
absorption peaks emit monochromatic light into the water,chlorophyll A in the water absorbs the energy of monochromatic light,releasing monochromatic light of emission peak of another wavelength. The light intensity emitted by cyanobacteria is proportional to the content of chlorophyll A in water. -
CS2733D Digital Oxido Reduction Potential ORP Sensor Electrode Probe
Designed for common water quality. Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices. Sewage industrial PH combination electrode adopts annular Teflon liquid junction, gel electrolyte and special glass sensitive membrane. Fast response and high Stability.(Hot sale price Industrial high temperature ph controller meter 4-20ma ph probe/ ph sensor/ ph electrode) -
Factory price DO TSS EC TDS Meter Tester online industrial PH controller ORP Salinity T6700
Large LCD screen color LCD display
Smart menu operation
Data record & curve display
Manual or automatic temperature compensation
Three groups of relay control switches
High limit, low limit, hysteresis control
4-20ma &RS485 multiple output modes
Same interface display input value, temperature, current value, etc
Password protection to prevent non-staff error operation -
Industrial Online Digital RS485 Output Signal Automatic Cleaning Oil in Water Sensor
Commonly used oil-in-water detection methods include suspension method (D/λ<=1), infrared spectrophotometry (not suitable for low range), ultraviolet spectrophotometry (not suitable for high range), etc. The online oil-in-water sensor adopts the principle of fluorescence method. Compared with several commonly used methods, the fluorescence method is more efficient, quicker and more reproducible, and can be monitored online in real time. The sensor has better repeatability and stability. With an automatic cleaning brush, it can eliminate air bubbles and reduce the impact of contamination on the measurement, making the maintenance cycle longer, and maintaining excellent stability during long-term online use. It can act as an early warning to the pollution of oil in water.