Featured
-
Factory For Orp Water Meter - TUS200 Portable Turbidity Tester – Chunye
Introduction Portable turbidity tester can be widely used in environmental protection departments, tap water, sewage, municipal water supply, industrial water, government colleges and universities, pharmaceutical industry, health and disease control and other departments of the determination of turbidity, not only for the field and on-site rapid water quality emergency testing, but also for laboratory water quality analysis. Technical specifications Model TUS200 Measuring method I... -
High Performance Ph Level Tester Liquid - CS1778 pH electrode – Chunye
The liquid junction of the sand core is used for easy cleaning. The ion exchange channel is relatively thin (conventional is PTFE, similar to the sieve structure, the sieve hole will be relatively large), effectively avoiding poisoning, and the shelf life is relatively long. Model No. CS1778 pH zero point 7.00±0.25pH Reference system SNEX Ag/AgCl/KCl Electrolyte solution 3.3M KCl Membrane resistance <600MΩ Housing material PP Liquid junction SNEX Waterproof ... -
18 Years Factory pH ORP Lon Temp Meter - CS1500 pH Sensor – Chunye
Conventional online ORP electrode •Using PTFE large ring diaphragm to ensure the durability of the electrode; •Can be used under 6 bar pressure; •Long service life; •Optional for high alkali/high acid process glass; •Optional internal NTC temperature sensor for precise temperature compensation; •TOP 68 insertion system for reliable measurement of transmission; •Only one electrode installation position and one connecting cable are required; •Continuous and accurate ORP measurement system with... -
8 Year Exporter Membrane Residual Chlorine Sensor for Waste water - On-line Acid, Alkali and Salt Concentration Meter Electromagnetic Conductivity Transmitter T6038 – Chunye
Function Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as percent and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value. Typical Use This instrument... -
Free sample for Personal Ozone Monitor - CS1768 Plastic Housing pH Sensor – Chunye
Complex environment ✬Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage. ✬The ceramic hole parameter electrode seeps out of the interface, which is not easy to be blocked. ✬High-strength glass bulb design, the glass appearance is stronger. ✬Large sensing bulbs increase the ability to sense hydrogen ions, and perform well in complex environment. ✬The electrode material PP has high impact resistance, mechanical strength and toughness, resistance to a ... -
Excellent quality Benchtop Conductivity Meter - Digital Suspended Solids (Sludge concentration) Sensor with Automatic Cleaning – Chunye
The principle of the Suspended Solids (Sludge concentration) is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the sludge concentration. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in se... -
Factory Outlets Meat Ph Tester - CS1728 pH Sensor – Chunye
•Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage •The ceramic pore parameter electrode oozes out of the interface and is not easy to be blocked, which is suitable for monitoring of hydrofluoric acid environmental media. •High-strength glass bulb design, the glass appearance is stronger. •The electrode adopts low noise cable, the signal output is farther and more stable •Large sensing bulbs increase the ability to sense hydrogen ions, and perform ... -
Big discounting Tds Salinity Meter - CS1745 Plastic Housing pH Sensor – Chunye
Model No. CS1745 pH zero point 7.00±0.25pH Reference system SNEX Ag/AgCl/KCl Electrolyte solution 3.3M KCl Membrane resistance <800MΩ Housing material PP Liquid junction SNEX Waterproof grade IP68 Measurement range 0-14pH Accuracy ±0.05pH Pressure resistance ≤0.6Mpa Temperature compensation NTC10K,PT100,PT1000 (Optional) Temperature range 0-80℃ Calibration Sample calibration, standard liquid calibration Double Junction Yes Cab... -
Cheapest Factory Ph Meter Electrode - CS3732 Conductivity Sensor – Chunye
Specifications Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions. Suitable for low conductivity applications in the semiconductor, power, water and pharm... -
factory customized Tester Ph - CON200 Portable Conductivity/TDS/Salinity Meter – Chunye
Introduction CON200 handheld conductivity tester is specially designed for multi-parameter testing, providing a one-stop solution for conductivity, TDS, salinity and temperature testing. CON200 series products with precise and practical design concept; simple operation, powerful functions, complete measuring parameters, wide measurement range; One key to calibrate and automatic identification to complete the correction process; clear and readable display interface, excellent anti-i... -
professional factory for Epa Minimum Chlorine Residual - CS6511 Chloride Ion Sensor – Chunye
The online chloride ion sensor uses a solid membrane ion selective electrode for testing chloride ions floating in water, which is fast, simple, accurate and economical. • The patented chloride ion probe, with an internal reference fluid at a pressure of at least 100KPa (1Bar), seeps extremely slowly from the microporous salt bridge. Such a reference system is very stable and the electrode life is longer than the ordinary industrial electrode life • Easy to install: PG13.5 pipe thread for ... -
High Quality for Soil Ph And Moisture Tester - Online Membrane Residual Chlorine Meter T6555 – Chunye
Function Online residual chlorine meter is a microprocessor-based water quality online monitoring control instrument. Typical Use This instrument is widely used in online monitoring of water supply, tap water, rural drinking water, circulating water, washing film water, disinfectant water, pool water. and other industrial processes. It continuous monitoring and control residual chlorine, pH and temperature value in aqueous solution. Mains Supply 85~265VAC±10%,50±1Hz, power ≤3W; 9~36VDC, pow...