Featured
-
Top Suppliers Copper Conductivity Meter - Online Ion Meter T6510 – Chunye
Function Industrial online Ion meter is an online water quality monitoring and control instrument with microprocessor. It can be equipped with Ion selective sensor of Fluoride, Chloride, Ca2+, K+, NO3-, NO2-, NH4+, etc. Typical Use The instrument is widely used in industrial waste water, surface water, drinking water, sea water, and industrial process control ions on-line automatic testing and analysis, etc. Continuously monitor and control Ion concentration and temperature o... -
2021 Good Quality Types Of Electrodes In Ph Meter - CS1753 pH Sensor – Chunye
Designed for strong acid, strong base, waste water and chemical process. •The electrode adopts high-quality low-noise cable, which can make the signal output longer than 20 meters without interference. •The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of low conductivity and high purity water. Model No. CS1753 pH zero point 7.00±0.25pH... -
Super Purchasing for Urine Ph Tester Digital - CS7920D Online Flow-through Turbidity Sensor – Chunye
The principle of the turbidity sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the turbidity value. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in self-diagnosis function to ens... -
2021 Good Quality Dissolved Oxygen Electrode - CS1668 Plastic Housing pH Sensor – Chunye
Complex environment ✬Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage. ✬The ceramic hole parameter electrode seeps out of the interface, which is not easy to be blocked, and is suitable for monitoring the flue gas desulfurization environment. ✬High-strength glass bulb design, the glass appearance is stronger. ✬Large sensing bulbs increase the ability to sense hydrogen ions, and perform well in complex environment. ✬The electrode material PP has hi... -
Rapid Delivery for Ammonia Nitrogen Rapid Detector - CS1768D Digital pH Sensor – Chunye
✬Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage. ✬The ceramic hole parameter electrode seeps out of the interface, which is not easy to be blocked. ✬High-strength glass bulb design, the glass appearance is stronger. ✬Large sensing bulbs increase the ability to sense hydrogen ions, and perform well in complex environment. ✬The electrode material PP has high impact resistance, mechanical strength and toughness, resistance to a variety of organic s... -
Wholesale Liquid Level Meter Monitor - TUS200 Portable Turbidity Tester – Chunye
Introduction Portable turbidity tester can be widely used in environmental protection departments, tap water, sewage, municipal water supply, industrial water, government colleges and universities, pharmaceutical industry, health and disease control and other departments of the determination of turbidity, not only for the field and on-site rapid water quality emergency testing, but also for laboratory water quality analysis. Technical specifications Model TUS200 Measuring method I... -
OEM/ODM China Residual Chlorine Meter Analyzer - Digital Turbidity Sensor with Automatic Cleaning – Chunye
The principle of the turbidity sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the turbidity value. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in self-diagnosis function to ens... -
Renewable Design for Suspended Solid Meter - CS1797D Digital pH Sensor – Chunye
The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable. Adopt PP shell, upper and lower NPT3/4” pipe thread, easy to install, no need for sheath, and low installation cost. The electrode is integrated with pH, reference, solution grounding, and temperature compensation. 1. Using gel and solid dielectric double liquid interface structure, can be directly used in high viscosity suspens... -
Chinese wholesale Liquified Natural Gas Environment pH Electrode - Dissolved Hydrogen Meter-DH30 – Chunye
Introduction DH30 is designed based on ASTM Standard Test method. The precondition is to measure the concentration of dissolved hydrogen at one atmosphere for pure dissolved hydrogen water. The method is to convert the solution potential into the concentration of dissolved hydrogen at 25 degrees Celsius. The measurement upper limit is around 1.6 ppm. This method is the most convenient and fast method, but it is easy to be interfered by other reducing substances in the solution... -
Factory For Free Residual Chlorine In Water - CS2668 ORP Sensor – Chunye
•Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage •The ceramic pore parameter electrode oozes out of the interface and is not easy to be blocked, which is suitable for monitoring of hydrofluoric acid environmental media. •High-strength glass bulb design, the glass appearance is stronger. •The electrode adopts low noise cable, the signal output is farther and more stable •Large sensing bulbs increase the ability to sense hydrogen ions, and perform ... -
Factory selling Portable Turbidity Meter - Online Residual Chlorine Meter T6050 – Chunye
Function Online residual chlorine meter is a microprocessor-based water quality online monitoring control instrument. Typical Use This instrument is widely used in online monitoring of water supply, tap water, rural drinking water, circulating water, washing film water, disinfectant water, pool water. and other industrial processes. It continuous monitoring and control residual chlorine and temperature value in aqueous solution. Mains Supply 85~265VAC±10%,50±1Hz, power ≤3W; 9~36VDC, powe... -
Factory made hot-sale Digital Salinity Tester - CS1745 pH electrode – Chunye
1, Take use of ceramic diaphragm, so that the electricity has a stable liquid connection potential and low resistance characteristics, anti-blocking, anti-pollution. 2, High temperature resistance, 130℃ steam disinfection (disinfection 30-50 times), safety and health, in line with the requirements of food hygiene, fast response, stability, long service life. 3, With high temperature disinfection sensitive glass membrane, pH range: 0-14pH, temperature range: – 10-130 ℃, pressure range o...