Original Factory Ultrasonic Flow Meter - CS6511 Chloride Ion Sensor – Chunye Detail:
The online chloride ion sensor uses a solid membrane ion selective electrode for testing chloride ions floating in water, which is fast, simple, accurate and economical.
• The patented chloride ion probe, with an internal reference fluid at a pressure of at least 100KPa (1Bar), seeps extremely slowly from the microporous salt bridge. Such a reference system is very stable and the electrode life is longer than the ordinary industrial electrode life
• Easy to install: PG13.5 pipe thread for easy submersible installation or installation in pipes and tanks.
• High-quality imported single chip, accurate zero point potential without drift
• Double salt bridge design, longer service life
Model No. |
CS6511 |
pH range |
2~12 pH |
Measuring material |
PVC Film |
Housing material |
PP |
Waterproof rating |
IP68 |
Measurement range |
1.8~35,000mg/L |
Accuracy |
±2.5% |
Pressure range |
≤0.3Mpa |
Temperature compensation |
NTC10K |
Temperature range |
0-50℃ |
Calibration |
Sample calibration, standard liquid calibration |
Connection methods |
4 core cable |
Cable length |
Standard 5m cable or extend to 100m |
Mounting thread |
PG13.5 |
Application |
Industrial water, environmental protection, etc. |
Product detail pictures:
Related Product Guide:
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Original Factory Ultrasonic Flow Meter - CS6511 Chloride Ion Sensor – Chunye , The product will supply to all over the world, such as: Monaco, Netherlands, Dominica, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
By Beatrice from Spain - 2017.06.29 18:55
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Priscilla from Australia - 2018.12.11 14:13