pH/ORP Transmitter
-
CS2701 4-20mA RS485 Modbus water ORP Electrode
Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage.
The ceramic pore parameter electrode oozes out of the interface and is not easy to be blocked, which is suitable for monitoring of common water quality environmental media.
High-strength glass bulb design, the glass appearance is stronger.
The electrode adopts low noise cable, the signal output is farther and more stable
Large sensing bulbs increase the ability to sense hydrogen ions, and perform well in common water quality environment media. -
CS2668 ORP Sensor Ph Probe Sensor Industrial Lab Water Conductivity
Designed for Hydrofluoric acid environment.
The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of hydrofluoric acid environment media. The reference electrode system is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such as the reference electrode is easy to be polluted, reference vulcanization poisoning, reference loss and other problems. -
CS2733D Digital Oxido Reduction Potential ORP Sensor Electrode Probe
Designed for common water quality. Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices. Sewage industrial PH combination electrode adopts annular Teflon liquid junction, gel electrolyte and special glass sensitive membrane. Fast response and high Stability.(Hot sale price Industrial high temperature ph controller meter 4-20ma ph probe/ ph sensor/ ph electrode) -
CS1788D Digital RS485 pH Sensor Electrode for Pure Water Environment
Designed for pure water, low Ion concentration environment. Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices. -
Economy Digital pH Sensor Electrode RS485 4~20mA output signal CS1700D
CS1700D Digital pH sensor is suitable for general industrial processes, with double salt bridge design, doublelayer water seepage interface, and resistance to medium reverse seepage. The ceramic pore parameter electrode oozes out of the interface, which is not easy to be blocked, and is suitable for the monitoring of common water. Adopt PTFE large ring diaphragm to ensure the durability of the electrode; Application industry -
Common Water Quality Measurement Digital RS485 pH Sensor Electrode Probe CS1701D
CS1701D digital pH sensor is suitable for general industrial processes, with double salt bridge design, doublelayer water seepage interface, and resistance to medium reverse seepage. The ceramic pore parameter electrode oozes out of the interface, which is not easy to be blocked, and is suitable for the monitoring of common water quality environmental media. Adopt PTFE large ring diaphragm to ensure the durability of the electrode;Application industry: supporting agricultural water and fertilizer machine -
CS1733 Plastic Housing pH Sensor
Designed for strong acid, strong base, waste water and chemical process. -
CS1753 Plastic Housing pH Sensor
Designed for strong acid, strong base, waste water and chemical process. -
CS1755 Plastic Housing pH Sensor
Designed for strong acid, strong base, waste water and chemical process.
CS1755 pH electrode adopt the most advanced solid dielectric in the world and large-area PTFE liquid junction. Not easy to block, easy to maintain. The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments. With built-in temperature sensor (NTC10K, Pt100, Pt1000, etc. can be selected according to user requirements) and wide temperature range, it can be used in explosion-proof areas. The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable. Adopt PPS/PC shell, upper and lower 3/4NPT pipe thread, easy to install, no need for sheath, and low installation cost. The electrode is integrated with pH, reference, solution grounding, and temperature compensation. The electrode adopts high-quality low-noise cable, which can make the signal output longer than 20 meters without interference. The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of low conductivity and high purity water. -
CS1588 Glass Housing pH Sensor
Designed for pure water, low Ion concentration environment. -
CS1788 Plastic Housing pH Sensor
Designed for pure water, low Ion concentration environment. -
CS1543 Glass Housing pH Sensor
Designed for strong acid, strong base and chemical process.
CS1543 pH electrode adopt the most advanced solid dielectric in the world and large-area PTFE liquid junction. Not easy to block, easy to maintain. The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments. The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable. Adopt glass shell, easy to install, no need for sheath, and low installation cost. The electrode is integrated with pH, reference, solution grounding and temperature compensation. The electrode adopts high-quality low-noise cable, which can make the signal output longer than 20 meters without interference. The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability.