pH/ORP Transmitter
-
CS2733 ORP Sensor
Designed for common water quality.
Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage.
The ceramic pore parameter electrode oozes out of the interface and is not easy to be blocked, which is suitable for monitoring of common water quality environmental media.
High-strength glass bulb design, the glass appearance is stronger.
The electrode adopts low noise cable, the signal output is farther and more stable
Large sensing bulbs increase the ability to sense hydrogen ions, and perform well in common water quality environment media. -
CS2668 ORP Sensor
Designed for Hydrofluoric acid environment.
The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of hydrofluoric acid environment media. The reference electrode system is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such as the reference electrode is easy to be polluted, reference vulcanization poisoning, reference loss and other problems. -
CS1745 Plastic Housing pH Sensor
Designed for High temperature and biological fermentation process.
CS1745 pH electrode adopts the most advanced solid dielectric in the world and large-area PTFE liquid junction. Not easy to block, easy to maintain. The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments. With built-in temperature sensor (Pt100, Pt1000, etc. can be selected according to user requirements) and wide temperature range, it can be used in explosion-proof areas. -
CS1528 Glass Housing pH Sensor
Designed for Hydrofluoric acid environment.
HF concentration < 1000ppm
The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of hydrofluoric acid environment media. The reference electrode system is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such as the reference electrode is easy to be polluted, reference vulcanization poisoning, reference loss and other problems. -
CS1728 Plastic Housing pH Sensor
Designed for Hydrofluoric acid environment.
HF concentration < 1000ppm
The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of hydrofluoric acid environment media. The reference electrode system is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such as the reference electrode is easy to be polluted, reference vulcanization poisoning, reference loss and other problems. -
CS1737 Plastic Housing pH Sensor
Designed for Hydrofluoric acid environment.
HF concentration>1000ppm
The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of hydrofluoric acid environment media. The reference electrode system is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such as the reference electrode is easy to be polluted, reference vulcanization poisoning, reference loss and other problems. -
CS1515 pH Sensor soil measurement
Designed for moist soil measurement.
The reference electrode system of CS1515 pH sensor is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such as the reference electrode is easy to be polluted, reference vulcanization poisoning, reference loss and other problems. -
CS1597 Glass Housing pH Sensor
Designed for Organic Solvent and Non-aqueous Environment.
The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable. Adopt glass shell, upper and lower PG13.5 pipe thread, easy to install, no need for sheath, and low installation cost. The electrode is integrated with pH, reference, solution grounding. -
CS1797 Plastic Housing pH Sensor
Designed for Organic Solvent and Non-aqueous Environment.
The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable. Adopt PP shell, upper and lower NPT3/4” pipe thread, easy to install, no need for sheath, and low installation cost. The electrode is integrated with pH, reference, solution grounding, and temperature compensation. -
CS1529 Glass Housing pH Sensor
Designed for seawater environment.
The outstanding application of SNEX CS1529 pH electrode in seawater pH measurement. -
CS1729 Plastic Housing pH Sensor
Designed for seawater environment.
The outstanding application of SNEX CS1729 pH electrode in seawater pH measurement. -
CS1543 Glass Housing pH Sensor
Designed for strong acid, strong base and chemical process.
CS1543 pH electrode adopt the most advanced solid dielectric in the world and large-area PTFE liquid junction. Not easy to block, easy to maintain. The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments. The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable. Adopt glass shell, easy to install, no need for sheath, and low installation cost. The electrode is integrated with pH, reference, solution grounding and temperature compensation. The electrode adopts high-quality low-noise cable, which can make the signal output longer than 20 meters without interference. The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability.