Products

  • Online Ammonia Ammonium Ion-selective Electrodes Water Quality Monitoring RS485 4-20mA CS6714AD

    Online Ammonia Ammonium Ion-selective Electrodes Water Quality Monitoring RS485 4-20mA CS6714AD

    Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices.The CS6714AD ammonium ion selective electrode is an effective method to measure the ammonium ion content in the sample. Ammonium ion selective electrodes are also often used in online instruments, such as industrial online ammonium ion content monitoring. Ammonium ion selective electrode has the advantages of simple measurement, fast and accurate response. It can be used with PH meter, ion meter and online ammonium ion analyzer, and also used in electrolyte analyzer, and ion selective electrode detector of flow injection analyzer.
  • Factory Sales Online Ammonia Potassium ion Analyzer Meter 3/4NPT for wastewater CS6712AD

    Factory Sales Online Ammonia Potassium ion Analyzer Meter 3/4NPT for wastewater CS6712AD

    Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices.The CS6712AD potassium ion selective electrode is an effective method to measure the potassium ion content in the sample. Potassium ion selective electrodes are also often used in online instruments, such as industrial online potassium ion content monitoring. , Potassium ion selective electrode has the advantages of simple measurement, fast and accurate response. It can be used with PH meter, ion meter and online potassium ion analyzer, and also used in electrolyte analyzer, and ion selective electrode detector of flow injection analyzer.
  • Water Online Digital RS485 Chloride Ion Selective Sensor for Water Monitoring CS6711AD

    Water Online Digital RS485 Chloride Ion Selective Sensor for Water Monitoring CS6711AD

    CS6711AD digital chloride ion sensor uses a solid membrane ion selective electrode for testing fluoride ions floating in water, which is fast, simple, accurate and economical.The design adopts the principle of single-chip solid ion selective electrode, with high measurement accuracy. Double salt bridge design, longer service life.The patented chloride ion probe, with an internal reference fluid at a pressure of at least 100KPa (1Bar), seeps extremely slowly from the microporous salt bridge. Such a reference system is very stable and the electrode life is longer than the ordinary.
  • Digital Fluoride Ion Online ISE Probe for Wastewater Treatment Sensor CS6710AD

    Digital Fluoride Ion Online ISE Probe for Wastewater Treatment Sensor CS6710AD

    CS6710AD digital fluoride ion sensor uses a solid membrane ion selective electrode for testing fluoride ions floating in water, which is fast, simple, accurate and economical. The design adopts the principle of single-chip solid ion selective electrode, with high measurement accuracy. Double salt bridge design, longer service life.The patented fluoride ion probe, with an internal reference fluid at a pressure of at least 100KPa (1Bar), seeps extremely slowly from the microporous salt bridge. Such a reference system is very stable and the electrode life is longer than the ordinary.
  • T9002 Total Phosphorus Online Automatic Monitor Automatic Online Industry Wastewater Analyser Treatment Factory Price

    T9002 Total Phosphorus Online Automatic Monitor Automatic Online Industry Wastewater Analyser Treatment Factory Price

    1.Product Overview:
    Most marine organisms are very sensitive to organophosphorus pesticides. Some insects that are resistant to pesticide concentration can quickly kill marine organisms.There is an important nerve conducting substance in human body, called acetylcholinesterase. Organophosphorus can inhibit cholinesterase and make it unable to decompose acetyl cholinesterasee, resulting in a large accumulation of acetylcholinesterase in the nerve center, which can lead to poisoning and even death. Long-term low-dose organophosphorus pesticides can not only cause chronic poisoning, but also cause carcinogenic and teratogenic hazards.
    The analyzer can work automatically and continuously for a long time without attendance according to the site settings. It is widely used in industrial pollution source discharge wastewater, industrial process wastewater, industrial sewage treatment plant wastewater, municipal sewage treatment plant wastewater and other occasions. According to the complexity of site test conditions, the corresponding pretreatment system can be selected to ensure the test process is reliable,test results are accurate, and fully meet the needs of different occasions.
  • T9001 Ammonia Nitrogen On-line Automatic Monitoring

    T9001 Ammonia Nitrogen On-line Automatic Monitoring

    1.Product Overview:
    Ammonia nitrogen in water refers to ammonia in the form of free ammonia, which mainly comes from decomposition products of nitrogen-containing organic matter in domestic sewage by microorganisms, industrial wastewater such as coking synthetic ammonia, and farmland drainage. When the content of ammonia nitrogen in water is high, it is toxic to fish and harmful to human beings in varying degrees. The determination of ammonia nitrogen content in water is helpful to evaluate the pollution and self-purification of water, so ammonia nitrogen is an important indicator of water pollution.
    The analyzer can work automatically and continuously for a long time without attendance according to the site settings. It is widely used in industrial pollution source discharge wastewater, municipal sewage treatment plant wastewater, environmental quality surface water and other occasions. According to the complexity of site test conditions, the corresponding pretreatment system can be selected to ensure the test process is reliable,test results are accurate, and fully meet the needs of different occasions.
    This method is suitable for wastewater with ammonia nitrogen in the range of 0-300 mg/L. Excessive calcium and magnesium ions, residual chlorine or turbidity may interfere with the measurement.
  • T9000 CODcr Water Quality On-line Automatic Monitor

    T9000 CODcr Water Quality On-line Automatic Monitor

    Product Overview:
    Chemical oxygen demand (COD) refers to the mass concentration of oxygen consumed by oxidants when oxidizing organic and inorganic reducing substances in water samples with strong oxidants under certain conditions. COD is also an important index reflecting the degree of pollution of water by organic and inorganic reducing substances.
    The analyzer can work automatically and continuously for a long time without attendance according to the site settings. It is widely used in industrial pollution source discharge wastewater, industrial process wastewater, industrial sewage treatment plant wastewater, municipal sewage treatment plant wastewater and other occasions. According to the complexity of site test conditions, the corresponding pretreatment system can be selected to ensure the test process is reliable,test results are accurate, and fully meet the needs of different occasions
  • T9003 Total Nitrogen On-line Automatic Monitor

    T9003 Total Nitrogen On-line Automatic Monitor

    Product Overview:
    Total nitrogen in water mainly comes from decomposition products of nitrogen-containing organic matter in domestic sewage by microorganisms, industrial wastewater such as coking synthetic ammonia, and farmland drainage. When the total nitrogen content in water is high, it is toxic to fish and harmful to human beings in varying degrees. The determination of total nitrogen in water is helpful to evaluate the pollution and self-purification of water, so total nitrogen is an important indicator of water pollution.
    The analyzer can work automatically and continuously for a long time without attendance according to the site settings. It is widely used in industrial pollution source discharge wastewater, municipal sewage treatment plant wastewater, environmental quality surface water and other occasions. According to the complexity of site test conditions, the corresponding pretreatment system can be selected to ensure the test process is reliable,test results are accurate, and fully meet the needs of different occasions.
    This method is suitable for wastewater with total nitrogen in the range of 0-50mg/L. Excessive calcium and magnesium ions, residual chlorine or turbidity may interfere with the measurement.
  • T9008 BOD Water Quality On-line Automatic Monitor

    T9008 BOD Water Quality On-line Automatic Monitor

    Product Principle:
    Water sample, potassium dichromate digestion solution, silver sulfate solution (silver sulfate as a catalyst to join can more effectively straight-chain fatty compound oxide) and sulfuric acid mixture is heated to 175 ℃, dichromate ion oxide solution of organic matter after color change, analyzer to detect the changes in color, and the change of conversion into BOD value output and consumption of dichromate ion content of oxidizable organic matter quantity.
  • Digital COD Sensor STP Water Treatment Chemical Oxygen Demand

    Digital COD Sensor STP Water Treatment Chemical Oxygen Demand

    COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.It does not need reagent, no pollution, more economic and environmental protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability
  • Industrial Online Waterproof Digital Dissolved Ozone Sensor CS6530D

    Industrial Online Waterproof Digital Dissolved Ozone Sensor CS6530D

    Potentiostatic principle electrode is used to measure dissolved ozone in water. The potentiostatic measurement method is to maintain a stable potential at the electrode measuring end, and different measured components produce different current intensities under this potential. It consists of two platinum electrodes and a reference electrode to form a micro current measurement system. The dissolved ozone in the water sample flowing through the measuring electrode will be consumed.
  • Industrial Online Nitrate Nitrogen Sensor NO3-N Chloride Ion Probe Compensation Meter

    Industrial Online Nitrate Nitrogen Sensor NO3-N Chloride Ion Probe Compensation Meter

    On-line nitrite nitrogen sensor, no reagents required, green and non-polluting, can be monitored online in real time. Integrated nitrate, chloride (optional), and reference electrodes automatically compensate for chloride (optional), and temperature in water. It can be directly put into installation, which is more economical, environmentally friendly and convenient than traditional ammonia nitrogen analyzer. It adopts RS485 or 4-20mA output and supports Modbus for easy integration.